Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Industrial Relay/UniversalDescription: Contactor -3RT2 series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They can withstand a pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (extendable to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.11601+$417.624810+$406.730250+$398.3777100+$395.4725200+$393.2936500+$390.38841000+$388.57262000+$386.7569 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.46321+$156.028610+$151.958250+$148.8377100+$147.7523200+$146.9382500+$145.85281000+$145.17442000+$144.4960 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.32721+$156.028610+$151.958250+$148.8377100+$147.7523200+$146.9382500+$145.85281000+$145.17442000+$144.4960 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.61461+$209.413910+$203.950950+$199.7626100+$198.3058200+$197.2132500+$195.75641000+$194.84592000+$193.9354 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.64941+$156.028610+$151.958250+$148.8377100+$147.7523200+$146.9382500+$145.85281000+$145.17442000+$144.4960 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.47681+$308.346110+$300.302250+$294.1353100+$291.9903200+$290.3815500+$288.23651000+$286.89592000+$285.5553 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.87011+$229.203110+$223.223850+$218.6398100+$217.0453200+$215.8495500+$214.25501000+$213.25852000+$212.2620 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.45671+$417.532810+$406.640650+$398.2900100+$395.3854200+$393.2070500+$390.30241000+$388.48702000+$386.6717 -
![]()
Category: Industrial Relay/UniversalDescription: 3RU Series switch position indicator and test function stop button selector switch, used for manual/automatic reset screw connection or spring clip type pulse withstand voltage 6 kV insulation voltage 690V, providing independent installation with patch or DIN rail, please refer to 3RU21 thermal overload relay such as 706-1699, maximum 80A, designed for load current sensitive protection, with normal start. These thermal overload relays are suitable for use with Sirius S0 and S00 specification contactors. Note that screw terminals can only be used with screw terminals for overload, and spring terminals can only be used with spring terminals for overload. ###Approved CE, UL, CSA # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.78021+$499.464610+$486.435050+$476.4457100+$472.9712200+$470.3653500+$466.89081000+$464.71922000+$462.5476 -
![]()
Category: Industrial Relay/UniversalDescription: 3RU Series switch position indicator and test function stop button selector switch, used for manual/automatic reset screw connection or spring clip type pulse withstand voltage 6 kV insulation voltage 690V, providing independent installation with patch or DIN rail, please refer to 3RU21 thermal overload relay such as 706-1699, maximum 80A, designed for load current sensitive protection, with normal start. These thermal overload relays are suitable for use with Sirius S0 and S00 specification contactors. Note that screw terminals can only be used with screw terminals for overload, and spring terminals can only be used with spring terminals for overload. ###Approved CE, UL, CSA # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.54301+$685.548110+$661.493850+$658.4870100+$655.4802150+$650.6694250+$646.4599500+$642.25031000+$637.4395 -
![]()
Category: Industrial Relay/UniversalDescription: 3RU Series switch position indicator and test function stop button selector switch, used for manual/automatic reset screw connection or spring clip type pulse withstand voltage 6 kV insulation voltage 690V, providing independent installation with patch or DIN rail, please refer to 3RU21 thermal overload relay such as 706-1699, maximum 80A, designed for load current sensitive protection, with normal start. These thermal overload relays are suitable for use with Sirius S0 and S00 specification contactors. Note that screw terminals can only be used with screw terminals for overload, and spring terminals can only be used with spring terminals for overload. ###Approved CE, UL, CSA # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.65191+$596.692010+$575.755450+$573.1383100+$570.5213150+$566.3339250+$562.6701500+$559.00621000+$554.8188 -
![]()
Category: Industrial Relay/UniversalDescription: 3RN10-22 3RN10-22 Can monitor the alarm and trip conditions of two sensors. Alarm operation 1 normally open contact with additional trip condition conversion contact standard 22.5 mm module width 24 to 240V AC voltage range # # # Siemens 3RN1 thermistor relay 3RN1 thermistor relay is a set of overheat protection devices that can be used with external PTC thermistors to provide temperature monitoring for electrical drives, transformers, and other important components (such as bearings). The 3RN1 series operates based on the principle of closed-circuit current, allowing for self-monitoring in the event of a broken sensor circuit.17311+$2638.007910+$2614.026025+$2602.035150+$2590.0441100+$2578.0532150+$2566.0622250+$2554.0713500+$2542.0803 -
![]()
Category: Industrial Relay/UniversalDescription: Siemens Auxiliary contacts and accessories for Siemens contactor series. ###Siemens Sirius series contactors and control relays Siemens control devices are used for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.10521+$73.496510+$70.3010100+$69.7258250+$69.2784500+$68.57541000+$68.25592500+$67.80855000+$67.4251 -
![]()
Category: Industrial Relay/UniversalDescription: 3RB Series 3RB30 and 3RB31 solid state overload relays, maximum 80A, with internal power supply, designed for current sensitive protection of loads, with normal and high load start-up, can prevent excessive temperature rise caused by overload, phase imbalance or phase fault. Switch position indicator and test function open circuit level setting/internal ground fault detection selector switch, used for manual/automatic reset of Class 10 and Class 20 direct installation PTB 09 ATEX 3001 Ex II (2) GD # # # # approved CE, UL, CSA # # # electronic overload relay 3RB2 series solid state electronic overload relay, can be directly connected to Siemens SIRIUS contactor, providing accurate motor overload protection, with enhanced single-phase sensitivity, application: protecting 3 in 50/60Hz sine network. AC motor. These relays are not suitable for protecting single-phase or DC loads. The selection is based on the motor's full load current and the size of the contactor frame, such as S0025721+$1448.768210+$1435.597625+$1429.012350+$1422.4270100+$1415.8417150+$1409.2563250+$1402.6710500+$1396.0857 -
![]()
Category: Industrial Relay/UniversalDescription: Siemens Sirius Series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.87301+$531.908410+$518.032550+$507.3943100+$503.6941200+$500.9189500+$497.21871000+$494.90602000+$492.5934 -
![]()
Category: Industrial Relay/UniversalDescription: 3RB Series 3RB30 and 3RB31 solid state overload relays, maximum 80A, with internal power supply, designed for current sensitive protection of loads, with normal and high load start-up, can prevent excessive temperature rise caused by overload, phase imbalance or phase fault. Switch position indicator and test function open circuit level setting/internal ground fault detection selector switch, used for manual/automatic reset of Class 10 and Class 20 direct installation PTB 09 ATEX 3001 Ex II (2) GD # # # # approved CE, UL, CSA # # # electronic overload relay 3RB2 series solid state electronic overload relay, can be directly connected to Siemens SIRIUS contactor, providing accurate motor overload protection, with enhanced single-phase sensitivity, application: protecting 3 in 50/60Hz sine network. AC motor. These relays are not suitable for protecting single-phase or DC loads. The selection is based on the motor's full load current and the size of the contactor frame, such as S0039131+$1060.318610+$1023.114450+$1018.4639100+$1013.8134150+$1006.3725250+$999.8618500+$993.35111000+$985.9102 -
![]()
Category: Industrial Relay/UniversalDescription: Sirius 3RT1 3Pole Contactor, 12A, 5.5kW, 24V dc Coil30941+$597.588010+$576.620050+$573.9990100+$571.3780150+$567.1844250+$563.5150500+$559.84561000+$555.6520 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.79111+$242.421210+$236.097150+$231.2487100+$229.5623200+$228.2975500+$226.61111000+$225.55712000+$224.5031 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.55721+$1824.284010+$1807.699625+$1799.407450+$1791.1152100+$1782.8230150+$1774.5308250+$1766.2386500+$1757.9464 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.42371+$242.421210+$236.097150+$231.2487100+$229.5623200+$228.2975500+$226.61111000+$225.55712000+$224.5031 -
![]()
Category: Industrial Relay/UniversalDescription: Contactor -3RT2 series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They can withstand a pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (extendable to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.93891+$299.005810+$291.205650+$285.2255100+$283.1454200+$281.5854500+$279.50541000+$278.20542000+$276.9053 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.92971+$147.645110+$143.793450+$140.8405100+$139.8134200+$139.0431500+$138.01601000+$137.37412000+$136.7322 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.18971+$451.079510+$439.312250+$430.2906100+$427.1526200+$424.7992500+$421.66121000+$419.70002000+$417.7388 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Recognized CE, UL, CSA, CCC53741+$245.586010+$239.179450+$234.2676100+$232.5592200+$231.2779500+$229.56951000+$228.50172000+$227.4339 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.57421+$229.604410+$223.614750+$219.0226100+$217.4254200+$216.2274500+$214.63021000+$213.63192000+$212.6336 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.35781+$603.542210+$582.365350+$579.7182100+$577.0711150+$572.8357250+$569.1297500+$565.42381000+$561.1884 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT2 Series 3RT2 contactors are weather resistant and have been tested to be suitable for global use. They have specifications ranging from S00 to S2, with up to 37 kW for S00, up to 7.5 kW for S0, up to 18.5 kW for S2, and up to 37 kW for screw connections/spring clips. They are resistant to pulse voltage of 6 kV, insulation voltage of 690 V, and actual loss power of only 4 W. The marked K complies with DIN 40719 (which can be extended to IEC 204-2) and IEC 750; Q complies with DIN EN 61346-2 # # #. Screw terminal blocks can only be used with screw terminal blocks for overload, and spring terminal blocks can only be used with spring terminal blocks for overload. ###Approved CE, UL, CSA, CCC # # Siemens Sirius series contactors and control relays Siemens control devices for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.20081+$673.204210+$649.583050+$646.6304100+$643.6777150+$638.9535250+$634.8198500+$630.68601000+$625.9618 -
![]()
Category: Industrial Relay/UniversalDescription: Siemens Auxiliary contacts and accessories for Siemens contactor series. ###Siemens Sirius series contactors and control relays Siemens control devices are used for power supply units up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.32031+$62.411710+$59.6981100+$59.2097250+$58.8298500+$58.23281000+$57.96142500+$57.58155000+$57.2559 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT Series, above 5.5 kW, certified by Siemens 3RT Sirius contactor series in China, with a rated power exceeding 7.5 kW. This series is designed to be used in combination with Siemens 3RU6 overload relay. Siemens Sirius series contactors and control relays Siemens control devices are used for power supply devices up to 5.5 kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.38621+$83.922410+$80.2736100+$79.6168250+$79.1060500+$78.30321000+$77.93842500+$77.42755000+$76.9897 -
![]()
Category: Industrial Relay/UniversalDescription: 3RT10 The Siemens 3RT10 series contactors will provide excellent reliability and superior quality. Provide various normally open/normally closed models. The maximum conversion voltage is 690V, and the mechanical life is 3 x 107 operations. Main characteristics include * * size * * | * DC coil * * | * AC coil (sealed/in) * * | * * height (mm) * * | * width (mm) * * | * depth (mm) * * S00 | 3.2W | 4.6/27VA | 57.5 | 45 | 100.5 S0 | 5.4W | 7.8/61VA | 80 | 45 | 90 S2 (15kW) | 11.5W | 11/90VA | 105 | 55 | 115 S2 (18&22kW) | 11.5W | 13.5/127VA | 105 | 55 | 130 S3 (30kW) | 15W | 21/218VA | 140 | 70 | 140 S3 (37&45kW) | 15W | 22/270VA | 140 | 70 | 152.5 # # # Note stock 7515562 # # - coil provided separately # # # Recognized UL/CSA # # Standard IEC947, VDE0660, EN60947 # # # Siemens Sirius series contactors and control relays Siemens control devices for power supply devices up to 5.5kW. The complementary characteristics of the equipment allow for quick and easy assembly of components such as the engine and commutator. The perfect match between contactors, overloads, circuit breakers, and accessories with the same power rating provides a unified panel appearance, standard width, and does not lower the rating when installed side by side, saving space.62791+$401.603010+$391.126450+$383.0943100+$380.3006200+$378.2053500+$375.41151000+$373.66542000+$371.9193
